EC Urn Cross Information
Everlasting Cross™ is truly honored that you have chosen the exclusive memorial Urn Capsule to encapsulate your loved one’s ashes or memorabilia. To ensure you will receive their Everlasting Cross™ memorial as an Urn Capsule, the option needs to be chosen when you are choosing the end caps.
When you receive their handcrafted Everlasting Cross™, the first of two sealed plugs will be already installed. You will be installing the second sealed plug on the vertical bottom end, after placing either the ashes or memorabilia inside the cross. (Detailed instructions will be enclosed with the cross.)
Tools to Install Second Urn Seal
Once you have received the Everlasting Cross™. We have provided you with a wood dowel and a second seal to complete the installation of the Urn Capsule.
Note: You will also need a mallet or hammer and a soft towel.
Place Ashes or Memorabilia in the Everlasting Cross™, then follow steps below.
-
Step 1
After placing your loved one’s ashes or memorabilia into vertical bottom end. NOTE: Leaving 6 to 8 inches from bottom opening for the installation of the cross. Place a towel on ground, then place the cross on it, to prevent scratches.
-
Step 2
Place the second sealed plug into the vertical bottom end and manually push down on the plug to start the position of the seal.
(Note: Narrow end in first.)
-
Step 3
Place wood dowel on top of the seal as center as possible. Make sure the cross is placed on the soft cloth, to prevent no damage to the finish of the end cap.
-
Step 4
Now begin to hammer the seal plug into place. Using a circular pattern, this will help the plug go in easier and evenly.
-
Step 5
Continue to hammer the seal plug into the cross until you have reached the pre marked line on the wood dowel. This will ensure you have reached either 6 or 8 inches.
-
Step 6
The Urn Capsule installation is now complete, and their ashes or memorabilia is preserved. Their Everlasting Cross™ is ready to be installed in its forever resting place.
